Création électro pour ClickClick Graphique ; destination le musée napoléonien à Genappe
//Debounce ? http://www.arduino.cc/en/Tutorial/Debounce
//residence 10k + condensateur 10nf
#include
//Initialize the Mux Shield
MuxShield muxShield;
boolean digitalA[16], digitalB[16];
boolean pushed = 1;
int i,j;
//btn activé le + elevé
int A = 0, B = 0, LedV = 15, LedR = 13;
void setup()
{
muxShield.setMode(1, DIGITAL_IN_PULLUP); //set I/O 1 and 2 as digital in with pullup
muxShield.setMode(2, DIGITAL_IN_PULLUP);
muxShield.setMode(3, DIGITAL_OUT);//set I/O 3 as digital output
Serial.begin(9600);
muxShield.digitalWriteMS(3, LedV, LOW); //verteOff
muxShield.digitalWriteMS(3, LedR, LOW) ; //rougeOFF
}
void loop()
{
//lecture de toutes les In
for (i = 0; i < 10; i++)
{
digitalA[i] = muxShield.digitalReadMS(1, i);
if (digitalA[i] == pushed)
{
A = i + 1; //enregistrement du n du btn appuyé entre 1 et 16
}
};
for (i = 0; i < 12; i++)
{
digitalB[i] = muxShield.digitalReadMS(2, i);
if (digitalB[i] == pushed)
{
B = i + 1; //enregistrement du n du btn appuyé entre 1 et 16
}
};
Serial.print(" A="); Serial.print(A);
Serial.print(" B="); Serial.println(B);
// A et B donne un signal
if (A > 0 && B > 0)
{
//A != B alors rouge
if (A != B)
{
if ( A == 8 && B == 11)
{
LEDverte();
}
else if (A == 4 && B == 12) {
LEDverte();
}
else {
LEDrouge ();
};
} else {
LEDverte ();
};
};
//A = B alors vert
A = 0; B = 0;
muxShield.digitalWriteMS(3, LedV, LOW); //verteOff
muxShield.digitalWriteMS(3, LedR, LOW) ; //rougeOFF
}
void LEDverte () {
Serial.print("verte"); Serial.print(" -- A="); Serial.print(A); Serial.print(" & B="); Serial.println(B);
muxShield.digitalWriteMS(3, LedR, LOW) ;
for (j = 0; j < 5; j++) {
muxShield.digitalWriteMS(3, LedV, HIGH); //verteOn
delay(50);
muxShield.digitalWriteMS(3, LedV, LOW);
delay(50);
};
muxShield.digitalWriteMS(3, LedV, HIGH);
delay(2000);
muxShield.digitalWriteMS(3, LedV, LOW);
};
void LEDrouge () {
Serial.print("rouge"); Serial.print(" -- A="); Serial.print(A); Serial.print(" & B="); Serial.println(B);
muxShield.digitalWriteMS(3, LedV, LOW) ;
for (j = 0; j < 5; j++) {
muxShield.digitalWriteMS(3, LedR, HIGH); //verteOn
delay(50);
muxShield.digitalWriteMS(3, LedR, LOW);
delay(50);};
muxShield.digitalWriteMS(3, LedR, HIGH);
delay(2000);
muxShield.digitalWriteMS(3, LedR, LOW);
};
